| issue: jari's netsel-03 review, introduction improvements | <– Date –> <– Thread –> |
|
From: Jari Arkko (jari.arkko |
|
| Date: Wed, 25 Jan 2006 05:58:15 -0800 (PST) | |
o There is more than one available network attachment point, and the
different points may have different characteristics.
Add ", or even be from different providers".
o The user has multiple sets of credentials. For instance, the user
could have one set of credentials from a public service provider
and another set from his company.
Ok.
o There is more than one way to provide roaming between the access and home network, and service parameters or pricing differs between them. For instance, the access network could have both a direct relationship with the home network and an indirect relationship through a roaming consortium.
o The roaming relationships between access and home networks are so complicated that current AAA protocols can not route the requests to the home network unaided, just based on the domain in the given Network Access Identifier (NAI) [RFC2486] [I-D.ietf-radext- rfc2486bis].
o Payload packets get routed or tunneled differently, based on which particular roaming relationship variation is used. This may have an impact on the available services or their pricing.
Suggest combining these under a roaming effect item.
o Virtual Operators share the same infrastructure, such as wireless
access points.
Put this after the first bullet, or maybe as a part of the first bullet.
- (no other messages in thread)
Results generated by Tiger Technologies using MHonArc.