Capwap Mailing List: Issue 179: Change name of "AC Name with Index" to "AC Name with Priority"

[Pat Calhoun (pacalhou) (pcalhoun]

All,

Yong Zhang brought up the following to my attention on draft -12. I have
created issue 179 to track this, but I consider this a minor change - it
does not impact interoperability in any way.

> 2. You changed index to priority in the figure/description, but still
call it "AC Name with Index"
> 
> 4.6.5.  AC Name with Index
> 
>    The AC Name with Index message element is sent by the AC to the WTP
>    to configure preferred ACs.  The number of instances of this
message
>    element is equal to the number of ACs configured on the WTP.  The
WTP
>    also uses this message element to send its configuration to the AC.
> 
>       0                   1
>       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
>      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>      |   Priority  |   AC Name...
>      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> 
>    Type:   5 for AC Name with Index
> 
>    Length:   >= 2
> 
>    Priority:   A value between 1 and 255 specifying the priority order
>       of the preferred AC.  For instance, the value of one (1) is used
>       to set the primary AC, the value of two (2) is used to set the
>       secondary, etc.

Yes, I felt the name was OK, and a change was unnecessary. We can change
it, but I don't view that as critical. We can address this if we have a
chance before publication.

PatC