Re: CAPWAP IESG Review Comment T36
From: Pat Calhoun (pacalhou) (pcalhouncisco.com)
Date: Wed, 18 Jun 2008 18:38:51 -0700 (PDT)
OK, closing issue 77.

PatC 

-----Original Message-----
From: Romascanu, Dan (Dan) [mailto:dromasca [at] avaya.com] 
Sent: Wednesday, June 18, 2008 11:16 AM
To: Pat Calhoun (pacalhou); capwap [at] frascone.com
Subject: RE: [Capwap] CAPWAP IESG Review Comment T36

OK with me. (aha!)

Dan
 

> -----Original Message-----
> From: Pat Calhoun (pacalhou) [mailto:pcalhoun [at] cisco.com]
> Sent: Wednesday, June 18, 2008 7:25 PM
> To: capwap [at] frascone.com
> Subject: [Capwap] CAPWAP IESG Review Comment T36
> 
> All,
> 
> Here is the IESG Review Comment:
> 
>    T36 - Section 8.1 - 'The WTP retains the configuration of 
> parameters provided by
>    the AC that are non-default values.' - does this mean that any 
> parameter that has a
>    default value needs not be stored in non-volatile memory, and the 
> WTP will restore
>    the defaults for these parameters on all reset, power-up or 
> bootstrap event?
> 
> Fair comment - the text was clearly vague. I am proposing the 
> following
> text:
> 
> <text>
> 8.1.  Configuration Consistency
> [...]
> 
>    2. The WTP saves the configuration of parameters provided by the
>       AC that are non-default values into local non-volatile memory,
>       and are enforced during the WTP's power up initialization phase.
> </text>
> 
> PatC
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> http://lists.frascone.com/mailman/listinfo/capwap
> 
> Archives: http://lists.frascone.com/pipermail/capwap
> 

Results generated by Tiger Technologies using MHonArc.