Capwap Mailing List: Re: CAPWAP IESG Issue T4

[Pat Calhoun (pacalhou) (pcalhoun]

OK, closing issue 45.

PatC 

-----Original Message-----
From: Romascanu, Dan (Dan) [mailto:dromasca [at] avaya.com] 
Sent: Tuesday, June 17, 2008 5:22 AM
To: Pat Calhoun (pacalhou); capwap [at] frascone.com
Subject: RE: [Capwap] CAPWAP IESG Issue T4

OK with me. 

Dan
 

> -----Original Message-----
> From: Pat Calhoun (pacalhou) [mailto:pcalhoun [at] cisco.com]
> Sent: Monday, June 16, 2008 6:36 PM
> To: capwap [at] frascone.com
> Subject: [Capwap] CAPWAP IESG Issue T4
> 
> The following is the issue provided by the IESG:
> 
>    T4 - Section 2.3.1, page 25, Configure to Reset - it is not clear 
> what 'reset the
>    connection' means, this state needs clarification, for example what

> is the
>    difference / relationship to DTLS teardown
> 
> Although the actual Reset command provides much more detail, I am 
> proposing adding the last sentence to the 'Configure to Reset' state 
> transition description:
> 
>    Configure to Reset (h):  This state transition is used to reset the
>       connection either due to an error during the configuration 
> phase,
>       or when the WTP determines it needs to reset in order for the 
> new
>       configuration to take effect. The CAPWAP Reset command is used 
> to
>       indicate to the peer that it will initiate a DTLS teardown.
> 
> PatC
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> http://lists.frascone.com/mailman/listinfo/capwap
> 
> Archives: http://lists.frascone.com/pipermail/capwap
>