Capwap Mailing List: Re: CAPWAP IESG Issue T4

[Romascanu, Dan (Dan) (dromasca]

OK with me. 

Dan
 

> -----Original Message-----
> From: Pat Calhoun (pacalhou) [mailto:pcalhoun [at] cisco.com] 
> Sent: Monday, June 16, 2008 6:36 PM
> To: capwap [at] frascone.com
> Subject: [Capwap] CAPWAP IESG Issue T4
> 
> The following is the issue provided by the IESG:
> 
>    T4 - Section 2.3.1, page 25, Configure to Reset - it is 
> not clear what 'reset the 
>    connection' means, this state needs clarification, for 
> example what is the 
>    difference / relationship to DTLS teardown
> 
> Although the actual Reset command provides much more detail, 
> I am proposing adding the last sentence to the 'Configure to 
> Reset' state transition description:
> 
>    Configure to Reset (h):  This state transition is used to reset the
>       connection either due to an error during the 
> configuration phase,
>       or when the WTP determines it needs to reset in order 
> for the new
>       configuration to take effect. The CAPWAP Reset command 
> is used to
>       indicate to the peer that it will initiate a DTLS teardown.
> 
> PatC
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> http://lists.frascone.com/mailman/listinfo/capwap
> 
> Archives: http://lists.frascone.com/pipermail/capwap
>