Capwap Mailing List: Re: Issue 29: vendor specific payloads

[Margaret Wasserman (margaret]

These changes look good to me.

Margaret

On Dec 3, 2007, at 8:09 PM, Pat Calhoun (pacalhou) wrote:

> All,
>
> During today's face to face meeting, the group decided that this issue
> was valid and we need to resolve it in the current protocol. I am
> providing the proposed text changes to support the issue.
>
> Comments appreciated.
>
> <base draft>
>
> 4.6.39.  Vendor Specific Payload
>
>    The Vendor Specific Payload message element is used to communicate
>    vendor specific information between the WTP and the AC.  The Vendor
>    Specific Payload message element MAY be present in any CAPWAP
>    message.  The message element uses the following format:
>
>       0                   1                   2                   3
>       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
>      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>      |                       Vendor Identifier                       |
>      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>      |          Element ID           |   Value...    |
>      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>
>
> 5.1.  Discovery Request Message
> [...]
>    The following message elements MAY be included in the Discovery
>    Request message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 5.2.  Discovery Response Message
> [...]
>    The following message elements MAY be included in the Discovery
>    Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 5.3.  Primary Discovery Request Message
> [...]
>
>    The following message elements MAY be included in the Primary
>    Discovery Request message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 5.4.  Primary Discovery Response
> [...]
>    The following message elements MAY be included in the Primary
>    Discovery Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 6.1.  Join Request
> [...]
>    The following message element MAY be included in the Join Request
>    message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 6.2.  Join Response
> [...]
>    The following message elements MAY be included in the Join Response
>    message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 7.1.  Echo Request
> [...]
>    The following message elements MAY be included in the Echo Request
>    message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 7.2.  Echo Response
> [...]
>    The following message elements MAY be included in the Echo Response
>    message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.2.  Configuration Status
> [...]
>    The following message elements MAY be included in the Configuration
>    Status message.
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.3.  Configuration Status Response
> [...]
>    The following message element MAY be included in the Configuration
>    Status Response message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.4.  Configuration Update Request
> [...]
>    One or more of the following message elements MAY be included in  
> the
>    Configuration Update message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.5.  Configuration Update Response
> [...]
>    The following message elements MAY be present in the Configuration
>    Update Response message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.6.  Change State Event Request
> [...]
>    One or more of the following message elements MAY be present in the
>    Change State Event Request message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.7.  Change State Event Response
> [...]
>    The following message elements MAY be included in the Change State
>    Event Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.8.  Clear Configuration Request
> [...]
>    The following message elements MAY be included in the Clear
>    Configuration Request message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 8.9.  Clear Configuration Response
> [...]
>    The following message elements MAY be included in the Clear
>    Configuration Request message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.1.1.  Image Data Request
> [...]
>
>    The following message elements MAY be included in the Image Data
>    Request message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.1.2.  Image Data Response
> [...]
>    The following message elements MAY be included in the Image Data
>    Response message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.2.  Reset Request
>    The following message elements MAY be included in the Reset Request
>    message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.3.  Reset Response
> [...]
>    The following message element MAY be included in the Reset Response
>    message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.4.  WTP Event Request
> [...]
>    More than one of each messsage element
>    listed MAY be included in the WTP Event Request message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.5.  WTP Event Response
> [...]
>    The following message elements MAY be included in the WTP Event
>    Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.6.  Data Transfer Request
> [...]
>    The following message elements MAY be included in the Data Transfer
>    Request message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 9.7.  Data Transfer Response
> [...]
>    The following message elements MAY be included in the Data Transfer
>    Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 10.1.  Station Configuration Request
> [...]
>    More than one of each message
>    element listed MAY be included in the Station Configuration Request
>    message.
> [...]
>    o  Vendor Specific Payload, see Section 4.6.39
>
> 10.2.  Station Configuration Response
> [...]
>    The following message elements MAY be included in the Station
>    Configuration Response message:
>
>    o  Vendor Specific Payload, see Section 4.6.39
>
> </base draft>
>
>
> <binding draft>
>
> 3.1.  IEEE 802.11 WLAN Configuration Request
> [...]
>    The following message element MAY be present.
> [...]
>    o  Vendor Specific Payload, see [3]
>
> 3.2.  IEEE 802.11 WLAN Configuration Response
> [...]
>    The following message element MAY be present.
> [...]
>    o  Vendor Specific Payload, see [3]
>
> </binding draft>
>
> PatC
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> http://lists.frascone.com/mailman/listinfo/capwap
>
> Archives: http://lists.frascone.com/pipermail/capwap