Capwap Mailing List: Re: FW: [sag_ro_wg] CAPWAP Spec, CAPWAP Header

[Pat Calhoun (pacalhou) (pcalhoun]

Issue 24 created.

 

PatC

---

From: Bob O'Hara (boohara)
Sent: Monday, November 19, 2007 9:27 AM
To: capwap
Subject: [Capwap] FW: [sag_ro_wg] CAPWAP Spec, CAPWAP Header

Forwarding for an outside reader.

 -Bob

Bob O'Hara
Cisco Systems - WNBU

Phone:  +1 408 853 5513
Mobile: +1 408 218 4025
 

---

From: Jeff Gembler [mailto:jgembler [at] intelleflex.com]
Sent: Friday, November 16, 2007 1:55 PM
To: sag_ro_wg [at] lists.epcglobalinc.org
Subject: [sag_ro_wg] CAPWAP Spec, CAPWAP Header

 

I have been reading the CAPWAP spec:

 

    Network Working Group                                 P. Calhoun, Editor

    Internet-Draft                                       Cisco Systems, Inc.

    Expires: December 13, 2007                         M. Montemurro, Editor

                                                          Research In Motion

                                                          D. Stanley, Editor

                                                              Aruba Networks

                                                               June 11, 2007

 

                        CAPWAP Protocol Specification

                 draft-ietf-capwap-protocol-specification-07

 

 

Page 40 shows the binary encoding for the CAPWAP Header.

There is a text alignment problem on this page. 

The WBID field is shown as,  what would appear to be,  4.5 bits in length.

The Flags field,  3.5 bits in length.

What is correct   5,3 bits ?  4,4 bits ?

 

 

Jeff Gembler

Intelleflex