| RE: Should be able to Read Back Information Set from the AC | <– Date –> <– Thread –> |
|
From: Bob O'Hara (boohara) (boohara |
|
| Date: Thu, 26 Jan 2006 09:07:10 -0800 (PST) | |
I don't believe that debugging is one of the requirements agreed to by the group. I don't think that readback is necessary to support the operational requirements. -Bob -----Original Message----- From: Philip Rakity [mailto:philip.rakity [at] u4eatech.com] Sent: Wednesday, January 25, 2006 6:30 PM To: Capwap [at] frascone.com Subject: [Capwap] Should be able to Read Back Information Set from the AC There is a general problem that one cannot read information that the AC sets from the AP. For example the SSID and perhaps other fields. This makes debugging difficult and in general is not a good idea. For each mesage element such as IEEE 802.11 Add WLAN there should be a corresponding get. Philip Rakity prakity [at] u4eatech.com _________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.frascone.com/mailman/listinfo/capwap Archives: http://lists.frascone.com/pipermail/capwap
-
Should be able to Read Back Information Set from the AC Philip Rakity, January 25 2006
- Re: Should be able to Read Back Information Set from the AC Darren, January 26 2006
- RE: Should be able to Read Back Information Set from the AC Bob O'Hara (boohara), January 26 2006
-
RE: Should be able to Read Back Information Set from the AC Pat Calhoun (pacalhou), January 26 2006
-
RE: Should be able to Read Back Information Set from the AC David T. Perkins, January 26 2006
- Re: Should be able to Read Back Information Set from the AC Darren, January 26 2006
- Re: Should be able to Read Back Information Set from the AC Philip Rakity, January 26 2006
-
RE: Should be able to Read Back Information Set from the AC David T. Perkins, January 26 2006
Results generated by Tiger Technologies using MHonArc.